"500' Wire Spools and 1/2" Tubing:"

From: Mike mdeu11@optonline.net

To get a 500'spool of wire on a piece of 1/2" tubing take an arbor and secure it to the pilot bit of a 7/8" hole saw assmebly. Secure it so it is upside down on the pilot bit. the wider side of the arbor fits the hole and you can redrill the plastic spools to fit the 1/2" tubing.


If you have any Tricks of the Trade you would like to add or if you have any comments please feel free to Email E.T.E..

Tricks of the trade

Back to Main Page

2007, Electricians Toolbox Etc...

Design by TC