"Make A Close Nipple:"
From: Joe Ivy email@example.com
Thread the conduit with running threads To a length of 8 to 12 inches or
more depending on the threader and the size of the conduit. Remove the conduit from the
threader and measure back from the end of the threads to the location of the begining
return threads on the unthreaded conduit. Clamp the conduit in the vise at the end of the
previously threaded end. "clamp on to the threads". Cut and thread back to
opposing threads. Cut running threads to appropriate length, file end so that the threads
will start. This will get you out of a bind and will work for any sized nipple.
If you have any Tricks of the Trade you would like to add or if you have any comments please feel free to Email E.T.E..
Tricks of the trade
Back to Main Page